setup 2 seagate sata hard disks
Posted: February 19th, 2005, 2:31 am
how do i set up 2 sata hard drives?
is it just like ata hard drives where you can configure a hard drive a master or slave drive?
tanx
It's almost like setting up a PATA drive except there is no master/slave in SATA drive. So you don't need to play with the jumpers. Depends on your mother board, you might need to install the SATA driver which comes with your SATA drive (or you can download it). Hope this help.joker_ibay wrote:how do i set up 2 sata hard drives? is it just like ata hard drives where you can configure a hard drive a master or slave drive? tanx