Explanation of "redundant power supply"
-
- Registered User
- Posts: 2
- Joined: August 10th, 2005, 5:51 pm
Explanation of "redundant power supply"
In a server when you have redundant power supplies and they both have power cords plugged into them are they both actually drawing power? Or is one power supply on "stand by" and only draws power if the other one "dies".
I've also seen the term "hot plug redundant power supply" is this something different?
Last edited by cljones1951 on August 11th, 2005, 4:58 pm, edited 1 time in total.
I have never seen a PSU with dual power function. One might be the power for your monitor and the other one from the AC main.
GigaByte GA-7VTXH 266, 2x256MB PC2100 DDR, Athlon XP 2100+ (266), MSI GF4Ti4600-VTD, Internal 56K Modem, SBLive 5.1, 10/100 NIC.
IDE: 2x20GB HDD, Sony CD-RW & DVD-ROM
JeanTech 400W (+3.3v 28A; +5v 35A; +12v 17A and +3.3v/+5v => 220W & +12v => 17A)
-
- Registered User
- Posts: 2
- Joined: August 10th, 2005, 5:51 pm
Re: Explanation of "redundant power supply"
cljones1951 wrote:In a server when you have redundant power supplies and they both have power cords plugged into them are they both actually drawing power? Or is one power supply on "stand by" and only draws power if the other one "dies". I've also seen the term "hot plug redundant power supply" is this something different?
-
- Registered User
- Posts: 512
- Joined: December 14th, 2004, 8:47 pm
- Location: Buffalo, New York
If one power fails to operate, the other will continue to operate, the secondary will draw minimal power in till needed. Hot swappable is a power supply that you can pull out while the computer is powered up, you don't need to shut down.
http://www.technoland.com/power.htm
If I could remember all I have forgotten, I would be a smart man.