Explanation of "redundant power supply"

Talk about PC parts, builds, upgrades, and hardware troubleshooting.
Post Reply
cljones1951
Registered User
Posts: 2
Joined: August 10th, 2005, 5:51 pm

Explanation of "redundant power supply"

Post by cljones1951 »

In a server when you have redundant power supplies and they both have power cords plugged into them are they both actually drawing power? Or is one power supply on "stand by" and only draws power if the other one "dies". I've also seen the term "hot plug redundant power supply" is this something different?
Last edited by cljones1951 on August 11th, 2005, 4:58 pm, edited 1 time in total.
simon
Registered User
Posts: 44
Joined: June 6th, 2005, 10:10 am

Post by simon »

I have never seen a PSU with dual power function. One might be the power for your monitor and the other one from the AC main.
GigaByte GA-7VTXH 266, 2x256MB PC2100 DDR, Athlon XP 2100+ (266), MSI GF4Ti4600-VTD, Internal 56K Modem, SBLive 5.1, 10/100 NIC. IDE: 2x20GB HDD, Sony CD-RW & DVD-ROM JeanTech 400W (+3.3v 28A; +5v 35A; +12v 17A and +3.3v/+5v => 220W & +12v => 17A)
cljones1951
Registered User
Posts: 2
Joined: August 10th, 2005, 5:51 pm

Re: Explanation of "redundant power supply"

Post by cljones1951 »

cljones1951 wrote:In a server when you have redundant power supplies and they both have power cords plugged into them are they both actually drawing power? Or is one power supply on "stand by" and only draws power if the other one "dies". I've also seen the term "hot plug redundant power supply" is this something different?
richh0323
Registered User
Posts: 512
Joined: December 14th, 2004, 8:47 pm
Location: Buffalo, New York

Post by richh0323 »

If one power fails to operate, the other will continue to operate, the secondary will draw minimal power in till needed. Hot swappable is a power supply that you can pull out while the computer is powered up, you don't need to shut down. http://www.technoland.com/power.htm
If I could remember all I have forgotten, I would be a smart man.
Post Reply