Upgrading Memory Question

Talk about PC parts, builds, upgrades, and hardware troubleshooting.
Post Reply
Tebow2000
Registered User
Posts: 1099
Joined: January 19th, 2004, 7:56 am
Location: New Orleans, Louisiana
Contact:

Upgrading Memory Question

Post by Tebow2000 »

Alright, I am looking at upgrading my memory.. Do I need to reinstall all my programs if I change chips or will it transfer auto? Thanks
Redcode Hosting redcodehosting.com | Unix Shared Hosting | sales[aT]redcodehosting[dOt]com
Sumpin_Wong
Registered User
Posts: 198
Joined: February 29th, 2004, 6:58 am
Location: NE Ohio
Contact:

Post by Sumpin_Wong »

Upgrading your memory.. as in your RAM modules? (PC3200 etc)

If you upgrade you ram modules there is no need to reinstall any software, or any other applications. The OS doesn't care about your Ram, but the motherboads BIOS does.

Bottom line.. Changing ram modules will have no affect whatsoever on your OS or applications/software within the OS.
Last edited by Sumpin_Wong on May 16th, 2004, 3:42 pm, edited 2 times in total.
User avatar
ccb056
Site Administrator
Posts: 981
Joined: January 14th, 2004, 11:36 pm
Location: Texas
Contact:

Post by ccb056 »

Sumpin_Wong's correct, as long as you're upgradding the RAM, you don't need to do anything to the operating system. Usually double sided (single density) RAM modules work better than single sided (double density) ram modules.
Tebow2000
Registered User
Posts: 1099
Joined: January 19th, 2004, 7:56 am
Location: New Orleans, Louisiana
Contact:

Post by Tebow2000 »

Thanks guys!
Redcode Hosting redcodehosting.com | Unix Shared Hosting | sales[aT]redcodehosting[dOt]com
Sumpin_Wong
Registered User
Posts: 198
Joined: February 29th, 2004, 6:58 am
Location: NE Ohio
Contact:

Post by Sumpin_Wong »

To the best of my knowledge (and please correct me if I'm wrong)..
The only 2 pieces of hardware that would require you to reinstall drivers and/or reformat would be a new HDD or a new Mobo.

I have swapped out CPU, RAM, Floppy drives, DvD players, CD/RW's.. and many other different devices, and have never had to reconfigure anything.


However..
If you install a new motherboard, there is a very good chance that you will need to reformat your HDD, but sometimes.. for reasons unknown, it'll boot up and run like a charm. I have never been able to install a new mobo and have the old HDD/OS boot up and run, but I was at a friends house and watched it happen to him.
User avatar
ccb056
Site Administrator
Posts: 981
Joined: January 14th, 2004, 11:36 pm
Location: Texas
Contact:

Post by ccb056 »

That is correct, if the new motherboard uses the same or similiar chipset as the old one, then a reformat may not be necessary, but if the new motherboard uses a completely different chipset, then you will probable have to reformat.
Tebow2000
Registered User
Posts: 1099
Joined: January 19th, 2004, 7:56 am
Location: New Orleans, Louisiana
Contact:

Post by Tebow2000 »

For the HDD, you have to reinstall everything but if you just put another one in, you dont have too.
Redcode Hosting redcodehosting.com | Unix Shared Hosting | sales[aT]redcodehosting[dOt]com
Post Reply